e-Corder
These units are used for the collection, display and analysis of signals from many types of laboratory instruments. They connect to Windows XP, or later and computers via USB
View ProductID Line : pondpol
Ultrasonic Nozzle
Sono-Tek Ultrasonic Nozzles reduce:
Material consumption by up to 80%
Wasteful overspray and atmospheric contamination
Waste disposal
Servicing and downtime
Versatile, Reliable, Consistent
Spray patterns easily shaped for precise coating
Highly controllable spray produces consistent results
Non-clogging, Corossion resistant
No moving parts to wear out
Ultra-low flow rate capabilities, intermittent or continuous
Vortexing Nozzle
Controllable, rotational air movement.Produces a conical spray pattern that is 2″ – 6″ in diameter, depending on frequency and distance to substrate
Capable of spraying in any orientation over a range of ultrasonic frequencies
Dual Liquid Feed Option
Sono-Tek’s dual liquid feed option allows for even greater flexibility in your process, as two liquids can be mixed right at the nozzle’s atomizating surface.
Ultrasonic atomization produces a tight and controllable drop size distribution. This is capable of micro-quantity dispensing. Dual liquid feed avoids premature mixing of components. Ideal for Micro-encapsulation
Micro-Mist
Liquids are delivered through an external hypotube to the nozzle’s atomizing surface. A low-pressure air stream through the nozzle’s central orifice entrains the spray and produces a very tight, percision spray pattern (with fine line spray widths as low as 0.015″ possible.
Ultra low flow spray rates over a wide range (from 0.3 – 9 ml/hour)
Fuel Cell Coating Nozzles
Ultrasonic nozzles are ideal for spraying Proton Exchange Membranes (PEMs) with catalyst solutions including carbon black, conductive inks, PTFE binder, platinum, nickel and/or resins. The uniform thin film coatingachieved with ultrasonics retains the porosity of the electrode and does not impede the transport of reactants due to flooding of the electrode surface. Catalyst solutions will not clog the ultrasonic nozzle, allowing for precise coatingswith controlled droplet sizes at ultra-low flow rates.
Conveyorized Tabletop Enclosure
A complete stand-alone ultrasonic spray system that can be fully integrated with Sonotek systems.
Enclosure
Stainless steel paneling
Aluminum frame (stainless steel option available)
Exhausted enclosure
Polycarbonate view shields
Leveling feet
Conveyor System
Chain drive (stainless steel)
Chain race (UHMW)
60” (1.52 m) length
Chain speed: 0-10 ft/min (0-3 m/min)
These units are used for the collection, display and analysis of signals from many types of laboratory instruments. They connect to Windows XP, or later and computers via USB
View ProductTethered membranes are planar supported phospholipid bilayers held above a gold electrode by a set of hydrophilic polyethylene glycol (PEG) chains covalently bonded to the gold surface by organic disulfide anchors
View ProductThe e-corder 210 and e-corder 410 recording systems are ideal for teaching. They can be used at all tertiary levels of chemistry / biochemistry / physics experimental courses to perform both simple and advanced experiments
View Product